Matrix X

Professional Audio Analog Device : Microphone , Guitar PreAmplifier

• Stereo “Sound Card Input” for connecting with output of sound card (2 balanced, 1/4” TRS)
• Stereo “Sound Card Output” for sending signals to Line In of sound card (2 balanced, 1/4” TRS)
• Stereo “Line Input” to receive external line level signal (2 balanced, 1/4” TRS)
• Stereo “Monitor Output” with volume control for connecting active speakers (2 balanced, 1/4” TRS)
• 2 Stereo headphone outputs with independent volume control (1/4” stereo TRS)
• 1 “Mic / Guitar In”, with a XLR and TS combo connector that microphone and electric guitar/bass share and a gain control knob
• XLR of combo connector is balanced, TS is un-balanced
• 2 input signal LEDs (blue, one for each channel), indicate if there is any signal available at the input channel
• 2 input peak LEDs (red, one for each channel), indicate if an input signal is near distortion
• 48V phantom power with switch (press button) and indicated LED, provides power to XLR only
• 1 “Direct Monitor” button toggles the input signal between direct monitoring of the input or the sound card output.
• 1 “Guitar On / Off” button turns on “Mic / Guitar In” function in front panel